EVOLV Sprint / Tour V2 / XL Throttle Settings

Modified on Thu, 08 Dec 2022 at 03:50 PM

To access the settings:

  1. Simultaneously hold both power and mode buttons for 3-4 seconds.
  2. If your display requires a password to access the settings, enter 2-6-2-6 using the Mode button.
  3. Use the power button to cycle forward through the P settings and mode button to cycle backward. Use the Power button to switch fields. Press and hold Power to finalize.
  4. Use the mode button to increase setting value and power button to decrease.


Page No.Page DescriptionSPRINTTOUR V2TOUR XLTOUR XL-R
P00
Motor Wheel Size (inches)8 inches8.5 inches10 inches
10 inches
P01Low voltage cut-off (accuracy 0.5)31.5V
41.5V41.5V43V
P02Motor pole pairs (pair),
pole pairs = number of magnetic steel pieces divided by 2
15151515
P03Choice of Speed Signal: Do Not Change1111
P04
Speed Display:
(0) km/h
(1) mp/h
0000
P05(0) Zero Start
(1) Non-Zero Start
0
000
P06(0) Cruise is invalid
(1) Cruise is valid
0000
P07Soft and Hard start selection:
(0) Hard start
(1) Soft start
0000
P08Percent Speed Limit: (5% minimum to 100% maximum)100100100100
P09E-ABS Intensity:
(0) Turn Off
(1) Weak (recommended)
(2) Strong
11
11


Error Codes (See Dashboard Manual for error code meanings & Diagnostics):


Brake Sensor Error
Motor Error
Throttle Error
Controller Error


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article