To access the settings:
1. Simultaneously hold both power and mode buttons for 3-4 seconds.
2. Use the power button to cycle through the P settings.
3. Use the mode button to change a setting.
Page No. | Page Description | City / City Plus | Tour (First Gen.) | Pro / Pro-R |
P01 | Backlight brightness Range: 1 - 3 Dim: 1, Bright: 3 Default: 3 | 3 | 3 | 3 |
P02 | Mileage unit of measure Default: KM-000, Mi-001 | Dependent upon country of origin. | Dependent upon country of origin. | Dependent upon country of origin. |
P03 | Battery, Voltage Specification 24V, 36V, 48V, 52V, 60V | 36V / 48V | 48V | 52V / 60V |
P04 | Display timeout in minutes Range: 0 - 60 Default: 5 Display will not timeout: 0 | 5 | 5 | 5 |
P05 | Reserved Page | 0 | 0 | 0 |
P06 | Wheel Diameter Accuracy is 0.1 Default: 10.0 | 8 Inches | 8.5 Inches | 10 Inches |
P07 | Magnet Count for measuring speed Default: 28 Range: 0 - 255 | 28 | 28 | 28 |
P08 | Available power for use Range: 0 - 100% | 100 | 100 | 100 |
P09 | Kick to engage motor ON: 001 OFF: 000 (safety / ease of use) | ON: 001 | ON: 001 | ON: 001 |
P10 | Reserved page | 0 | 0 | 0 |
P11 | Electronic braking Range: 1 - 5 Weak: 1 Strong: 5 | 1 | 1 | 1 |
P12 | Acceleration Strength Range: 1 -5 Soft: 1 Strong: 5 | 3 | 3 | 3 |
P13 | Reserved Page | 0 | 0 | 0 |
P14 | Reserved Page | 0 | 0 | 0 |
P15 | Low voltage cut-off Default: 42V | 30.5V / 39.6V | 39.6V | 42.6V / 49V |
P16 | Odometer Reading | ODO | ODO | ODO |
P17 | Cruise Control ON: 1 OFF: 0 | OFF: 0 | OFF: 0 | OFF:0 |
P18/P19 | Reserved Page | 0 | 0 | 0 |
P20 | Communication Protocol Default: 4 Cannot be changed | 4 | 4 | 4 |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article